用于机械振动实时监测的光纤光栅有源传感装置

把一对中心反射波长分别为1562.11nm和1562.71nm的光纤光栅粘贴在均质、等厚、等腰三角形悬臂梁上下表面作为环形腔光纤激光器端镜，当机械振动激励自由端时，通过观测激光输出脉冲，地施加于自由端的机械振动的频率进行了实时监测；观察两光栅波长漂移量差值的变化，可在0～6.1mm的范围内判断所测振动的振幅。低于100Hz时，实验结果与实际值基本吻合。     

新型AFM探针的制备及应用

采用熔拉 -腐蚀复合方法 ,将普通单模石英光纤制成直锥形光纤探针。利用自制工具将探针打弯 ,制成悬臂式光纤探针 ,在AFM上取得了较理想的测试结果。将自制光纤探针和商用硅材料探针获得的两种扫描图像进行了对比 ,分析了悬臂式光纤探针的特点     

某工程地基基坑支护探讨

软土地基中的支护是基础工程的关键，在节约成本的前提下，选择合理的支护结构至关重要．通过对某公司将要开发的2个基坑支护方案的项目进行的相关分析、计算和探讨，总结出了软土地基中的基坑支护方案的选择原则及其相对应的施工措施等．     

Differential FBG sensor for temperature-compensated high-pressure (or displacement) measurement

A differential fiber Bragg grating (FBG) sensor with a free active element bulk-modulus for high-pressure (or displacement) measurement is presented. Based on the differential measurement method and an isosceles triangle cantilever structure, problems of cross-sensitivity and chirped signal in FBG sensor are improved both theoretically and experimentally. Preliminary experiments indicate that temperature-compensated measurement results agree well with the theoretical analysis. Displacement measurement sensitivity is 1.75 pm/μm, and the estimated pressure measurement resolution can reach 0.27 MPa in case the wavelength shift measurement resolution is 0.01 nm.     

Development of a finite-element analysis methodology for the propagation of delaminations in composite structures

Analysing the collapse of skin-stiffened structures requires capturing the critical phenomenon of skin-stiffener separation, which can be considered analogous to interlaminar cracking. This paper presents the development of a numerical approach for simulating the propagation of interlaminar cracks in composite structures. A degradation methodology was introduced in MSC.Marc, which involved the modelling of a structure with shell layers connected by user-defined multiple-point constraints (MPCs). User subroutines were written that employ the virtual crack closure technique (VCCT) to determine the onset of crack growth and modify the properties of the user-defined MPCs to simulate crack propagation. Methodologies for the release of failing MPCs are presented and are discussed with reference to the VCCT assumption of self-similar crack growth. The numerical results obtained by using the release methodologies are then compared with experimental data for a double-cantilever beam specimen. Based on this comparison, recommendations for the future development of the degradation model are made, especially with reference to developing an approach for the collapse analysis of fuselage-representative structures. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 1, pp. 15–42, January–February, 2007.     

用超磁致伸缩调谐光纤光栅的光分/插复用器

提出并研究了一种新型多信道切换的全光分/插复用器,它主要由光纤Bragg光栅(FBG)和一对光环行器组成.采用了一种高效的超磁致伸缩材料(GMM)使FBG产生有效的Bragg波长偏移.用控制电流来调控FBG的应变和Bragg波长偏移.用4只相同的FBG与波长叠加技术相结合,可建立能提供15种不同下路信道方式的OADM.     

Relaxation Dynamics and Magnetic Anisotropy in a Low‐Symmetry DyIII Complex

The magnetic behaviour of a Dy(LH)₃ complex (LH^? is the anion of 2‐hydroxy‐N′‐[(E)‐(2‐hydroxy‐3‐methoxyphenyl)methylidene]benzhydrazide) was analysed in depth from both theoretical and experimental points of view. Cantilever torque magnetometry indicated that the complex has Ising‐type anisotropy, and provided two possible directions for the easy axis of anisotropy due to the presence of two magnetically non‐equivalent molecules in the crystal. Ab initio calculations confirmed the strong Ising‐type anisotropy and disentangled the two possible orientations. The computed results obtained by using ab initio calculations were then used to rationalise the composite dynamic behaviour observed for both pure Dy^III phase and Y^III diluted phase, which showed two different relaxation channels in zero and non‐zero static magnetic fields. In particular, we showed that the relaxation behaviour at the higher temperature range can be correctly reproduced by using a master matrix approach, which suggests that Orbach relaxation is occurring through a second excited doublet.     

Solution-phase synthesis of ordered mesoporous carbon as resonant-gravimetric sensing material for room-temperature H_2S detection

H_2S can cause multiple diseases and poses a great threat to human health.However,the precise detection of extremely toxic H_2S at room temperature is still a great challenge.Here,a facile solvent evaporation induced aggregating assembly(EIAA) method has been applied for the production of ordered mesoporous carbon(OMCs) in an acidic THF/H_2 O solution with high-molecular-weight poly(ethylene oxide)-b-polystyrene(PEO-b-PS) copolymers as the structure-directing agent,formaldehyde and resorcinol as carbon precursors.Along with the continuous evaporation of THF from the mixed solution,cylindrical micelles are formed in the solution and further assemble into highly ordered mesostructure.The obtained OMCs possesses a two-dimensional(2 D) hexagonal mesostructure with uniform and large pore diameter(～19.2 nm),high surface area(599 m~2/g),and large pore volume(0.92 cm~3/g).When being used as the resonant cantilever gas sensor for room-temperature H_2S detection,the OMCs has delivered not only a superior gas sensing performance with ultrafast re s ponse(14 s) and recovery(21 s) even at low concentration(2 ppm) but also an excellent selectivity toward H_2S among various common interfering gases.Moreover,the limit of detection is better than 0.2 ppm,indicating its potential application in environmental monitoring and health protection.     

立方结构Fe基磁性材料弹性系数第一性原理计算

通过赝势平面波法(CASTEP)及全电势线性缀加平面波法(FLAPW)，以bcc-Fe为对象，研究第一性原理计算立方结构Fe基磁性材料弹性系数的方法，分析影响计算立方结构Fe基磁性材料弹性系数准确度的各项因素. 结果表明，在第一性原理弹性系数计算中，晶格常数是决定弹性系数计算准确度的关键因素；势函数的选择也会影响计算准确度. 使用全电势基矢的FLAPW法可以得到更为精准的弹性系数计算结果. 计算得到bcc-Fe的弹性系数C₁₁，C₁₂，C₄₄分别为246 GPa，121 GPa，113 GPa，与实验值基本一致. 利用本方法，计算了新型Fe-Ga磁致伸缩材料的弹性系数C₁₁，C₁₂，C₄₄分别为207 GPa，166 GPa及108 GPa. 关键词： 弹性系数 磁致伸缩材料 赝势平面波法 全电势线性缀加平面波法